Artiteq non-adhesive DiBond Rails per piece in 6 dimensions

The Artiteq DiBond Rail has been developed to attach your DiBond, Forex, mirror, etc. both more safely and more easily. It has the ability to adjust the object in height. It also ensures that the object hangs more firmly and more beautifully, especially thin objects. The thickness of the rail itself is 15mm, whatever the distance from the back of the panel to the wall.

Except for the 300cm lengths (these come in a bundle of 5 pieces, with a minimum quantity of 10 pieces per order), all other sizes are supplied loose and per piece. The corner connectors and wall hooks with corresponding screws and plugs are optional.

Note: The 300cm lengths are only delivered in the Netherlands and Belgium.

Suggestion: Try to keep about 10cm from each side where possible, for maximum carrying capacity. You can - if desired - saw the rail to size yourself with a hacksaw.

The load-bearing capacity depends on many factors, such as the substrate and the material of the (photo) panel itself. It is also very important to thoroughly clean the surface to be covered with an alcohol cleaner and to wait at least 72 hours before hanging the object. Advice: Do not use on photo paper.